What Should a 95 sqm Concrete Driveway Cost in Australia?
By PumpX Team ·
A 95 square metre driveway is a big pour, bigger than the standard double driveway most online guides use. We have not seen the thread, so we do not know the poster's block, finish or existing surface. Here is how to think about the cost and what to ask in a quote.
Indicative ranges
Published 2026 Australian guides give some starting points, though many are from publishers who also market trade services, so treat them as rough:
- Plain broom-finish driveways and paths: about A$85 to A$130 per square metre, supplied and laid. One source gives a wider plain-slab range of A$75 to A$150, with A$110 typical.
- Coloured or stencilled work: around A$130 to A$200 per square metre.
- Exposed aggregate: around A$140 to A$220 per square metre.
Multiplying those by 95 sqm gives roughly A$8,000 to A$12,500 for plain, and noticeably higher for decorative finishes. Large areas sometimes get a slightly lower rate per square metre, and difficult sites a higher one. These are not quotes. Prices differ by city, season and the contractor's workload.
What changes the price
| Factor | Effect |
|---|---|
| Demolition of old driveway | Adds removal, disposal and sometimes base rework (see our removal and replacement guide) |
| Slope and drainage | More formwork, falls, drains or crossovers |
| Thickness and strength | Heavier vehicles may need thicker slabs or higher strength |
| Reinforcement | Mesh or bar, and bar chairs |
| Finish | Broom is cheapest; exposed, stamped and coloured cost more |
| Control joints | Saw cutting or tooled joints |
| Access | Can a truck reach, or is a pump needed |
| Council | Crossover permits, stormwater and driveway approvals |
| Sealer | Optional but common on decorative work |
Access and pump hire
Many driveways can be poured straight from the truck chute, which keeps costs down. If the truck cannot reach all areas, or you have gardens or a house in the way, you may need a pump. For ranges, see what's included in concrete pump hire and the rate calculator. A large area also means more concrete trucks, and the pour must be planned so the crew can finish it before it sets.
Volume check
Concrete volume equals area times thickness. At a typical residential driveway thickness of 100 mm, 95 sqm is 9.5 cubic metres before allowance for waste and uneven base. Thicker slabs, edge thickening or heavy vehicles increase that. Ask the contractor what thickness and strength they will use and why.
What a decent quote includes
- Demolition and disposal, if any
- Excavation, base material and compaction
- Formwork
- Reinforcement spec
- Concrete grade and volume
- Pump or barrow charges if needed
- Finishing method and joints
- Sealing, curing and cleanup
- Permits and who obtains them
- Warranty, payment schedule and timeline
Our Melbourne quote-reading guide explains how to interrogate the line items.
Why quotes vary
One guide reports three concreters quoting the same 60 sqm driveway at A$5,200, A$5,900 and A$7,400. Differences usually come from base work, thickness, reinforcement, access assumptions and how busy the contractor is. Labour is typically the biggest component, with one guide estimating 40 to 50 per cent. The cheapest quote is not always the best, but the dearest is not always better either.
Getting it right on the day
- Make sure vehicles and pets are away and neighbours know.
- Confirm access for the truck and pump, and the washout location.
- Plan for weather. Rain, extreme heat or wind affect finishing and curing.
- Keep traffic off for the time the contractor specifies.
See how to book a concrete pump truck and ordering concrete truck and pump: a checklist if your contractor asks you to organise supply.
Large pours need planning
With roughly 9.5 cubic metres or more, you may need more than one truck, and the concrete supplier may stagger deliveries so the crew can keep up. A big slab also needs a plan for expansion and control joints, since long uninterrupted runs crack more readily. Ask how the contractor will divide the area, what the finishing crew size will be and whether any section will be poured on a different day. If your driveway curves or changes direction, mention it, because formwork complexity affects price. Compare the same scope on each quote.
Key takeaways
- Plain driveways are commonly quoted around A$85 to A$130 per square metre, so 95 sqm might be roughly A$8,000 to A$12,500, with decorative finishes costing more.
- Removal of the old surface, base work, steel, access and pump hire can change the total.
- Get at least three itemised written quotes for the same scope.
- Ask about thickness, strength, reinforcement and joints.
- These are indicative figures only. Prices vary by region and time.
Need a pump for tricky access? Find local companies at /services on PumpX.
Original question on Reddit: r/AusRenovation: Expected cost for 95sqm driveway?